Drying the Mediterranean Sea is surely a bad idea, but I wonder why nobody ever built hydroelectric generators into the Strait of Gibraltar.
There is a huge steady flow of surface water from the Atlantic into the Mediterranean (1 million cubic meters per second), and almost as much flows back into the Atlantic in deeper layers.
Why not tap into these streams to generate electricity?
Tidal energy is expensive - sea water is very corrosive and under water maintenance access isn't cheaply solved. Also you need to retain access for ships and subs.
The UK has the second highest tidal ranges in the world and is probably a world leader, we still generate nearly no energy from tidal.
They wanted to create a fleet of LTA vessels some 20 years ago, but never made it beyond a reduced-scale prototype and eventually had to file bancruptcy after using up all their investors' money.
The only thing that remains is an impressively huge hangar in the middle of nowhere near Berlin, which is used as an indoor resort today.
The issue is, that the process to overturn a law takes years, but introducing the same law (with a slightly different paint) again takes months.
Or for some reductio ad absurdum: Slavery is legal for 10 months per year, but every October the Slavery Legalization law gets struck down by the courts, proof that our democracy works.
Why does it take so long though? In the United States courts often issue a preliminary injunction or temporary restraining order to stop the enforcement of law. This way the courts can take their time in deciding a case while the new law does not get enforced.
In this case (IIRC) two service providers went to court and the law was put out of force for them, at which point the federal agency in charge of enforcing it decided not to do so until the matter was resolved by the highest court. So in some sense it did work.
I wonder how hydrogen peroxide (a strong oxidant) can reverse the yellowing of plastics, if the yellowing is the result of oxidation. I'm not a chemist, but this doesn't seem to make sense.
I am not a chemist, but the following comment from a retr0bright video[1] claims that retr0bright works not by reversing the process, but by speeding it up.
Interestingly, The idea that the yellowing is from the Brominated Flame Retardants in the plastic is actually itself a myth. It's a sort of believable just-so story because people look up bromine, see it is brown, and go "ah, makes sense". The interaction doesn't actually involve the brominated Fame Retardants, and is a breakdown of the butadiene chain of the plastic polymer which is effectively an oxidization which is catalyzed by energy (whether light (UV being the most energetic), or Heat). This happens with All ABS plastics, including those that don't have any Tetrobromobisphenol-A. This is why UV Stabilisers and absorbers tend to be a common inclusion in the formula of ABS plastic. (And why when they are forgotten/omitted you see things like car recalls due to seatbelt fasteners degrading). The yellowing is effectively the molecular debris from that breakdown, which gives a colour to the plastic. Hydrogen Peroxide is a strong oxidizer- it works in retrobrite not by reversing the process, but actually speeding it up. It reverses the colour change because while it significantly speeds up the butadiene being broken down, it also breaks down the molecular debris that results from it, to smaller, colorless compounds. It will also interact with other compounds in the plastic- for example, those that might have been added for the factory colouring.The result is that the colour of the original plastic returns- possibly without any factory set colouring compounds as well. Another downside is that because the butadiene chain is still compromised, retrobrite can never restore the structure of the plastic, so it will remain brittle. I've seen suggestions that an acid might be able to chemically recompose the butadiene polymer. I was able to successfully test a paste of Oxalic Acid, without any sunlight exposure for example- though it took a week and the colour change was very small.
This might explain why direct sunlight can brighten plastic instead of yellowing it even more.
Unfortunately retrobriting doesn't take off surface dirt or ink or similar. Painting-like surface preparation is required beforehand. Just dumping sort-of-casually clean parts in the solution will lead to splotchiness and areas that don't get cleaned. The official site recommends a gentle dishwasher cycle, I've had luck with that.
In a way, its good it works that way. It doesn't strip off the apple logo or "mac" lettering or whatever.
Your theory is reasonable but it seems its actually breaking down a bromine based fire retardant. Bromine itself is kinda gross brown color and some oxides like dibromine pentoxide are clearish-white so its quite realistic that hitting it with an oxidizer clears things up.
I am not sure either. I have some quirky white plastic Matroshka measuring cups that I left out on the sill as a decoration for several years. They were exposed to sunlight, and have yellowed. Interestingly, if I run them through the dishwasher they become even more yellow, and fade with a bit of time.
I wonder if it has anything to do with sodium perchlorate in the dishwasher tabs, the heat of the dishwasher or both.
If you follow some links in the OP you can end up at a source article[1] that has some comments on the actual chemical processes occurring for both the discolouration and reversal (Ctrl-F "bromine").
TL;DR: Over time the bromine based flame retardants in retro-era plastics degrade (hence the yellow/brown colour) and H2O2 plus some energy (UV light/heat) can be used to reverse the process.
I heard a similar story (a joke from the communist era) around 1995 from a Czech colleague. It was about an artist whose works were never censored.
When the other artists asked him how he did it, he replied: "I always add a little white dog in my paintings. When the censor asks 'What is this dog?' I quickly remove it and he's satisfied."
